Significant changes to the International Plumbing Code, International Mechanical Code, International Fuel Gas Code. / Fred Grable, Gregg Gress. txt

Por:

Grable, Fred

Colaborador(es):

Gress, Gregg

Series The International CodesWashington, D.C. : International Code Council, 2020Descripción: x, 123 pages : ill. ; col. ;photo ; 28 cmTipo de contenido:

text

Tipo de medio:

unmediaded

Tipo de soporte:

volume

ISBN:

9781952468216
1952468213

Tema(s):

Clasificación LoC:

TH6123 G73 2020

Contenidos:

SIGNIFICANT CHANGES TO THE International Plumbing Code -- PART 1 International Plumbing Code -- Chapters 1 through 15 -- 202 Definition of Copper Alloy -- 202 Definition of Public and Private -- 202 Definition of Water Dispenser -- 308.9 Bundled Hot Water Piping Insulation -- 403.1.1 Fixture Quantity Calculations for Multiple User Facilities -- 403.1.2 Fixtures in Single-user Toilet Rooms Count Towards Total Required Quantities -- 403.2 Multiple-user Nonseparated Toilet Facilities -- 403.3.1, 403.5 Facilities and Drinking Fountains on Accessible Routes -- 403.3.3 Group S Toilet Facility Location -- 403.6 Service Sink Location -- 405.4.3 Wall Hung Fixture Carrier Standard for Water Closets -- 407.2 Bathtubs are Not Required to have Overflow Outlets -- 410.3.2 Quantities of Standing versus Wheelchair Drinking Fountains -- 410.4 Drinking Fountain Substitution using Water Dispensers -- 411.3 Water Heaters for Emergency Showers and Eye Wash Stations -- 412.3 Shower Control Valves to be Rated for the Installed Shower Head -- 412.5 Methods for Limiting Water Temperature Discharged to Bathtubs -- 412.10 Methods for Temperature Limitation at Head Shampoo Sinks and Footbaths -- 419.5 Tempered Water for Public Hand-Washing Lavatories -- 421.3.1 Standard for Shower Waste Fittings -- 501.2 ASSE 1017 Temperature Actuated Mixing Valves -- 602.3.5 Potable Water Pumps to Comply with NSF61 -- 605.12.3, 605.13.6 Solder and Flux to Conform to NSF61 -- 606.1 Individual Tenant Water Shut-off Valve -- 607.1.1, 607.1.2 Water Heaters Providing Tempered Water to Fixtures -- 608.15.2.1 Discharge from Backflow Preventer Relief Opening -- 608.17.2 Backflow Device for Low Hazard Boiler Applications -- 609.2 Two Water Service Pipes for Group 1-2, Condition 2 Healthcare Facilities -- 609.2.1 Tracer Wire for Buried Nonmetallic Water Service Piping -- Table 702.3 ABS Building Sewer Pipe Standard -- 705.2.4, 705.10.4 PVC and ABS Push-fit DWV Fittings -- 708.1.6 Removable Fixture Traps Serving as Cleanouts -- 717, 718 Methods for Restoring Building Sewer Piping -- 903.1.3 Protected Outdoor Vent Termination Method -- 915.1 Food Waste Disposers on Combination Waste and Vent Systems -- 1002.1 Direct Connection to Hydromechanical Grease Interceptor -- 1002.4.1.5 Fixture Drains Serving as a Trap Priming Method -- 1102.6 Roof Drains to be Tested and Rated for Flow -- 1106.2.1 Rainfall Rate Conversion Method -- 1202.1 Nonflammable Medical Gas Systems -- 1301.1 Nonpotable Rainwater Standard Alternative --

SIGNIFICANT CHANGES TO THE International Mechanical Code -- PART 2 International Mechanical Code -- Chapters 1 through 15 -- 307.2.1.1 Condensate Discharge -- 401.2, 403.1 Mechanical Ventilation for Dwelling Units -- 401.4, 501.3.1 Intake Opening and Exhaust Outlet Locations -- Table 403.3.1.1 Recirculation of Mechanical Exhaust Prohibited -- 403.3.1.3 Demand Controlled Ventilation -- 403.3.2.1 Outdoor Air for Dwelling Units -- 502.20 Manicure and Pedicure Station Exhaust System -- 504.4.1 Termination Location for Dryer Exhaust -- 506.3.7 Factory-Built Grease Duct Slope -- 507.1 Smoker Ovens with Integral Exhaust -- 514.2 Energy Recovery Ventilation Systems -- 602.2.1.8 Pipe and Duct Insulation Within Plenums -- 607.5.2 Duct Penetrations of Fire Barriers -- 607.5.5 Subducts Penetrating Shaft Enclosures -- 608.1, 403.3.1.5 Ventilation Air Distribution -- 801.21 Blocked Vent Switch for Oil-Fired Appliance -- 905.1 Wood-Burning Residential Hydronic Heaters -- 929 Unvented Alcohol Fuel-Burning Decorative Appliances -- 1101 through 1108 Ammonia Refrigeration Systems -- 1105.9 Machinery Room Means of Egress -- 1107 through 1110 Refrigerant Piping --

SIGNIFICANT CHANGES TO THE International Fuel Gas Code -- PART 3 International Fuel Gas Code Chapters 1 through 8 -- 202 Definition of Point of Delivery -- 307.2 Concealed Condensate Piping -- 402.7, 202 Press-Connect Joint -- 403.8.3 Threaded Joint Sealing -- 404.5 Fittings in Concealed Locations -- 503.5.6.1 Chimney Lining -- 503.8 Venting System Terminal Clearances -- 503.10.7 Vent Connector Junctions -- 614.7 Clothes Dryer Makeup Air -- 618.6 Return Air from Mechanical Room -- 623.2 Commercial Cooking Appliances --

Existencias ( 1 )
Notas de título ( 3 )

Existencias
Imagen de cubierta	Tipo de ítem	Biblioteca actual	Biblioteca de origen	Colección	Ubicación en estantería	Signatura topográfica	Materiales especificados	Info Vol	URL	Copia número	Estado	Notas	Fecha de vencimiento	Código de barras	Reserva de ítems	Prioridad de la cola de reserva de ejemplar	Reservas para cursos
	Libro Referencia CARIBET	CARIBET Biblioteca Arquitectura Colección de Referencia CARIBET				Referencia TH6123 G73 2020 (Navegar estantería(Abre debajo))				1	Disponible			91000000064493

Total de reservas: 0

SIGNIFICANT CHANGES TO THE International Plumbing Code --
PART 1 International Plumbing Code --
Chapters 1 through 15 --
202 Definition of Copper Alloy --
202 Definition of Public and Private --
202 Definition of Water Dispenser --
308.9 Bundled Hot Water Piping Insulation --
403.1.1 Fixture Quantity Calculations for Multiple User Facilities --
403.1.2 Fixtures in Single-user Toilet Rooms Count Towards Total Required Quantities --
403.2 Multiple-user Nonseparated Toilet Facilities --
403.3.1, 403.5 Facilities and Drinking Fountains on Accessible Routes --
403.3.3 Group S Toilet Facility Location --
403.6 Service Sink Location --
405.4.3 Wall Hung Fixture Carrier Standard for Water Closets --
407.2 Bathtubs are Not Required to have Overflow Outlets --
410.3.2 Quantities of Standing versus Wheelchair Drinking Fountains --
410.4 Drinking Fountain Substitution using Water Dispensers --
411.3 Water Heaters for Emergency Showers and Eye Wash Stations --
412.3 Shower Control Valves to be Rated for the Installed Shower Head --
412.5 Methods for Limiting Water Temperature Discharged to Bathtubs --
412.10 Methods for Temperature Limitation at Head Shampoo Sinks and Footbaths --
419.5 Tempered Water for Public Hand-Washing Lavatories --
421.3.1 Standard for Shower Waste Fittings --
501.2 ASSE 1017 Temperature Actuated Mixing Valves --
602.3.5 Potable Water Pumps to Comply with NSF61 --
605.12.3, 605.13.6 Solder and Flux to Conform to NSF61 --
606.1 Individual Tenant Water Shut-off Valve --
607.1.1, 607.1.2 Water Heaters Providing Tempered Water to Fixtures --
608.15.2.1 Discharge from Backflow Preventer Relief Opening --
608.17.2 Backflow Device for Low Hazard Boiler Applications --
609.2 Two Water Service Pipes for Group 1-2, Condition 2 Healthcare Facilities --
609.2.1 Tracer Wire for Buried Nonmetallic Water Service Piping --
Table 702.3 ABS Building Sewer Pipe Standard --
705.2.4, 705.10.4 PVC and ABS Push-fit DWV Fittings --
708.1.6 Removable Fixture Traps Serving as Cleanouts --
717, 718 Methods for Restoring Building Sewer Piping --
903.1.3 Protected Outdoor Vent Termination Method --
915.1 Food Waste Disposers on Combination Waste and Vent Systems --
1002.1 Direct Connection to Hydromechanical Grease Interceptor --
1002.4.1.5 Fixture Drains Serving as a Trap Priming Method --
1102.6 Roof Drains to be Tested and Rated for Flow --
1106.2.1 Rainfall Rate Conversion Method --
1202.1 Nonflammable Medical Gas Systems --
1301.1 Nonpotable Rainwater Standard Alternative --

SIGNIFICANT CHANGES TO THE International Mechanical Code --
PART 2 International Mechanical Code --
Chapters 1 through 15 --
307.2.1.1 Condensate Discharge --
401.2, 403.1 Mechanical Ventilation for Dwelling Units --
401.4, 501.3.1 Intake Opening and Exhaust Outlet Locations --
Table 403.3.1.1 Recirculation of Mechanical Exhaust Prohibited --
403.3.1.3 Demand Controlled Ventilation --
403.3.2.1 Outdoor Air for Dwelling Units --
502.20 Manicure and Pedicure Station Exhaust System --
504.4.1 Termination Location for Dryer Exhaust --
506.3.7 Factory-Built Grease Duct Slope --
507.1 Smoker Ovens with Integral Exhaust --
514.2 Energy Recovery Ventilation Systems --
602.2.1.8 Pipe and Duct Insulation Within Plenums --
607.5.2 Duct Penetrations of Fire Barriers --
607.5.5 Subducts Penetrating Shaft Enclosures --
608.1, 403.3.1.5 Ventilation Air Distribution --
801.21 Blocked Vent Switch for Oil-Fired Appliance --
905.1 Wood-Burning Residential Hydronic Heaters --
929 Unvented Alcohol Fuel-Burning Decorative Appliances --
1101 through 1108 Ammonia Refrigeration Systems --
1105.9 Machinery Room Means of Egress --
1107 through 1110 Refrigerant Piping --

SIGNIFICANT CHANGES TO THE International Fuel Gas Code --
PART 3 International Fuel Gas Code Chapters 1 through 8 --
202 Definition of Point of Delivery --
307.2 Concealed Condensate Piping --
402.7, 202 Press-Connect Joint --
403.8.3 Threaded Joint Sealing --
404.5 Fittings in Concealed Locations --
503.5.6.1 Chimney Lining --
503.8 Venting System Terminal Clearances --
503.10.7 Vent Connector Junctions --
614.7 Clothes Dryer Makeup Air --
618.6 Return Air from Mechanical Room --
623.2 Commercial Cooking Appliances --

Previo

Volver a resultados

1 Cuba
por Hageman, Alice L.
2 Cuba
por Hageman, Alice L.

Cerrar

Imprimir
Citar
Agregar a su carrito (remover)
Guardar registro
BIBTEX Dublin Core ISBD MARC (no-Unicode/MARC-8) MARC (Unicode/UTF-8) MARC (Unicode/UTF-8, Estándar) MARCXML MODS (XML) RIS
Más búsquedas

Buscar este título en:
HORIZON